Back to Search
Safety Data Sheet

BergaCare EM-HE-7

Berg + Schmidt

This Safety Data Sheet covers BergaCare EM-HE-7, manufactured by Berg + Schmidt. It complies with CHIP, 67/548/EEC regulations. Available in English. Last revised 5 June 2012.

CAS Number

68201-46-7

Language

🇬🇧English

Regulation

CHIP, 67/548/EEC

Revision Date

5 June 2012

Safety Information

Key Hazards

  • Not classified as dangerous according to GHS regulations
  • Slightly irritant to skin and eyes but not relevant for classification
  • No sensitization or carcinogenic/mutagenic properties identified
  • Low toxicity with oral LD50 greater than 5000 mg/kg in rats

First Aid Guide

Eye Contact

Rinse immediately with large quantities of water for at least 5 minutes while holding eyelids open. Subsequently consult an ophthalmologist.

Skin Contact

Wash immediately with plenty of water and soap. Remove contaminated clothing.

Inhalation

Move victim to fresh air immediately. Seek medical advice if symptoms develop.

Ingestion

Seek medical advice immediately. Avoid inducing vomiting due to aspiration risk.

Protection Needed

Eyes

Wear tightly sealed safety glasses or eye-shade for protection against splashing.

Hands

Wear chemical protective gloves with CE label and four-digit code, selected based on concentration and handling specifications.

Respiratory

Use proper respiratory protection when dust, aerosol, or mist generation occurs. Work in well-ventilated zones preferred.

Skin/Body

Wear chemical protective clothing with CE label including four-digit code to prevent contact with contaminated surfaces.

Physical Properties

AppearanceLight yellow liquid
OdourOdourless
pHNot available
Flash Point>100 °C
Boiling PointApproximately 100 °C (cloud point <25 °C)

Safe Handling

Handling Precautions
  • Use only in well-ventilated areas to minimize inhalation exposure
  • Avoid contact with skin, eyes, and clothing during handling
  • Keep container tightly closed when not in use
  • Do not eat, drink, smoke or sneeze at the workplace
  • Keep away from ignition sources and strong oxidizing agents
Storage

Store in original containers in a cool, dry, well-ventilated area. Ensure containers remain tightly sealed to prevent contamination and moisture absorption.

Share

Trusted by over 685,800+ users

in over 135 countries, from individual practitioners to global enterprises

Trusted by leading companies including PepsiCo, Transocean, JCB, Bridgestone, ThermoFisher, University of Leicester, Circle Health Group, Coca-Cola, and P&G

Spot SDS Changes. Simplify Your Audits.

Quickly compare the old and new versions of your SDS side by side, highlight updates, and keep track of changes with clear insights.

Continue
SDS comparison tool showing old and new SDS versions side by side
Small business COSHH compliance bundle with risk assessments and SDS management tools

Small Business Bundle

Big companies have safety teams-you don't. But you still have the same legal duty of care. That's why we built the Small Business Bundle.

It's free and gives you risk assessments, SDS management, and expert training-the same tools big businesses use, made simple for you. No cost. No hassle. Just compliance made easy. You're welcome.

Create a COSHH Risk Assessment
in Just 5 Simple Steps

COSHH 5-step wizard interface showing automated risk assessment creation in 60 seconds

Sevron's 5-Step Wizard creates fully compliant COSHH risk assessments in 60 seconds with AI-powered automation.

Connected to real-time tracking, updated safety data sheets, and a comprehensive dashboard for full audit readiness, it's part of a complete COSHH management software system trusted by industry leaders. No shortcuts, no barriers, no waiting. Just effortless chemical safety that you can start using right here, right now.

Frequently Asked Questions

What is a Safety Data Sheet (SDS)?

A Safety Data Sheet is a standardised document that provides detailed information about a chemical product’s hazards, safe handling procedures, storage requirements, and emergency measures. Under UK REACH and CLP regulations, suppliers must provide an SDS for hazardous substances to ensure workers can handle them safely.

How often should Safety Data Sheets be updated?

Safety Data Sheets should be reviewed and updated whenever new hazard information becomes available, when regulations change, or when the product formulation changes. Suppliers must update SDSs promptly and provide revised versions to customers. As a best practice, review your SDS library at least annually to ensure all documents are current.

Who is responsible for maintaining Safety Data Sheets?

Employers are legally responsible for obtaining and maintaining current SDSs for all hazardous substances used in their workplace. While suppliers must provide SDSs, employers must ensure they’re accessible to workers, kept up-to-date, and used to inform COSHH risk assessments and safe working procedures.

What are the 16 sections of a Safety Data Sheet?

The 16 mandatory SDS sections are: (1) Identification, (2) Hazard identification, (3) Composition/ingredients, (4) First-aid measures, (5) Fire-fighting measures, (6) Accidental release measures, (7) Handling and storage, (8) Exposure controls/PPE, (9) Physical properties, (10) Stability and reactivity, (11) Toxicological information, (12) Ecological information, (13) Disposal, (14) Transport, (15) Regulatory information, and (16) Other information.