Back to Search
Safety Data Sheet

Uvex clear Lens Cleaning Fluid 9992-000

uvex satety Australia Pty Ltd.

This Safety Data Sheet covers Uvex clear Lens Cleaning Fluid 9992-000, manufactured by uvex satety Australia Pty Ltd.. It complies with GHS/CLP regulations. Available in English. Last revised 22 December 2011.

CAS Number

,117-00-0

Language

🇬🇧English

Regulation

GHS/CLP

Revision Date

22 December 2011

Safety Information

Key Hazards

  • Causes eye irritation upon contact
  • Prolonged skin contact may cause drying and cracking
  • Contains approximately 20% isopropanol

First Aid Guide

Eye Contact

Flush the eyes immediately with copious amounts of water for at least 15 minutes, keeping eyelids open. Seek medical attention if irritation persists.

Skin Contact

Wash the affected area thoroughly with large amounts of water. Seek medical attention if effects persist.

Inhalation

Move to fresh air immediately. Seek medical attention if symptoms develop.

Ingestion

Give 2 glasses of water and induce vomiting. Seek medical attention if abdominal pain or persistent vomiting occurs.

Protection Needed

Eyes

Safety glasses or face shield recommended when handling the concentrate to prevent splashing.

Hands

Wear rubber or nitrile gloves when handling. PPE not necessary for incidental use such as lens cleaning.

Respiratory

Not normally required during routine use. Engineering controls like adequate ventilation are sufficient.

Skin/Body

Protective clothing recommended to minimize skin contact and prevent splashing.

Physical Properties

AppearanceClear to colorless liquid solution
OdourCharacteristic isopropanol odor
pHApproximately 7
Flash PointGreater than 70°C
Boiling Point80 to 100°C

Safe Handling

Handling Precautions
  • Avoid direct contact with skin and eyes during handling
  • Use only in well-ventilated areas to minimize vapor exposure
  • Keep containers tightly closed when not in use
  • Use only as intended for lens cleaning purposes
Storage

Store in original containers with caps tightly sealed. Keep below 35°C in a cool, dry location protected from physical damage.

Share

Trusted by over 685,800+ users

in over 135 countries, from individual practitioners to global enterprises

Trusted by leading companies including PepsiCo, Transocean, JCB, Bridgestone, ThermoFisher, University of Leicester, Circle Health Group, Coca-Cola, and P&G

Spot SDS Changes. Simplify Your Audits.

Quickly compare the old and new versions of your SDS side by side, highlight updates, and keep track of changes with clear insights.

Continue
SDS comparison tool showing old and new SDS versions side by side
Small business COSHH compliance bundle with risk assessments and SDS management tools

Small Business Bundle

Big companies have safety teams-you don't. But you still have the same legal duty of care. That's why we built the Small Business Bundle.

It's free and gives you risk assessments, SDS management, and expert training-the same tools big businesses use, made simple for you. No cost. No hassle. Just compliance made easy. You're welcome.

Create a COSHH Risk Assessment
in Just 5 Simple Steps

COSHH 5-step wizard interface showing automated risk assessment creation in 60 seconds

Sevron's 5-Step Wizard creates fully compliant COSHH risk assessments in 60 seconds with AI-powered automation.

Connected to real-time tracking, updated safety data sheets, and a comprehensive dashboard for full audit readiness, it's part of a complete COSHH management software system trusted by industry leaders. No shortcuts, no barriers, no waiting. Just effortless chemical safety that you can start using right here, right now.

Frequently Asked Questions

What is a Safety Data Sheet (SDS)?

A Safety Data Sheet is a standardised document that provides detailed information about a chemical product’s hazards, safe handling procedures, storage requirements, and emergency measures. Under UK REACH and CLP regulations, suppliers must provide an SDS for hazardous substances to ensure workers can handle them safely.

How often should Safety Data Sheets be updated?

Safety Data Sheets should be reviewed and updated whenever new hazard information becomes available, when regulations change, or when the product formulation changes. Suppliers must update SDSs promptly and provide revised versions to customers. As a best practice, review your SDS library at least annually to ensure all documents are current.

Who is responsible for maintaining Safety Data Sheets?

Employers are legally responsible for obtaining and maintaining current SDSs for all hazardous substances used in their workplace. While suppliers must provide SDSs, employers must ensure they’re accessible to workers, kept up-to-date, and used to inform COSHH risk assessments and safe working procedures.

What are the 16 sections of a Safety Data Sheet?

The 16 mandatory SDS sections are: (1) Identification, (2) Hazard identification, (3) Composition/ingredients, (4) First-aid measures, (5) Fire-fighting measures, (6) Accidental release measures, (7) Handling and storage, (8) Exposure controls/PPE, (9) Physical properties, (10) Stability and reactivity, (11) Toxicological information, (12) Ecological information, (13) Disposal, (14) Transport, (15) Regulatory information, and (16) Other information.